Clipper blades Checked against maker charts
The #15 clipper blade
A #15 blade leaves about 3/64" (1.2 mm) of coat.
Cut length
3/64"(1.2 mm)
Type
Finish cut (F/FC) — even, smooth result
This is a base blade for snap-on metal combs.
What the #15 is used for
- Pads of the feet — the official all-breeds rule on both charts
- Poodle face/feet where a #10 doesn't get close enough
- A legal comb base for Andis Universal and Wahl stainless combs
Breeds this length suits
Blade choice always depends on coat condition — a matted coat needs a shorter blade than the style chart says. The blade & comb finder walks you through it.
Which clippers it fits
#15 detachable blades use the A5 standard — they interchange across Andis, Oster, Wahl KM-series, and Heiniger A5-style clippers regardless of which brand made the blade. They do not fit 5-in-1 adjustable clippers (Wahl Bravura/Arco) or screw-on home clippers, which take their own blade systems.
Leaves more coat
#10 1/16"
Cuts closer
#30 1/50"
All blade sizes
FAQ
- How much hair does a #15 blade leave?
- A #15 blade leaves about 3/64" (1.2 mm) of coat.
- Will a #15 blade fit my clipper?
- #15 detachable blades follow the A5 standard, so they interchange across A5-style clippers from Andis, Oster, Wahl (KM series), and Heiniger. They do not fit 5-in-1 adjustable-blade clippers (like the Wahl Bravura) or screw-on home clippers — those use their own blade systems.
- Is a #15 blade safe to use at home?
- Close-cutting blades heat up fast and can burn skin. Check blade temperature against your forearm every few minutes, use coolant spray, and keep this length away from thin-skinned areas unless you've been shown how. When in doubt, this is a job for a professional groomer.
Sources