Clipper blades Checked against maker charts
The #30 clipper blade
A #30 blade leaves about 1/50" (0.5 mm) of coat.
Cut length
1/50"(0.5 mm)
Type
Close-cutting / surgical length
This is a base blade for snap-on metal combs.
What the #30 is used for
- The comb base: every brand's snap-on comb instructions start with 'put a #30 underneath'
- Oster's breed recipes are written '30 & 1" UC' — #30 under a Universal Comb
- Not a body blade on its own for pets — at 0.5 mm it's essentially skin-short
Breeds this length suits
Blade choice always depends on coat condition — a matted coat needs a shorter blade than the style chart says. The blade & comb finder walks you through it.
Which clippers it fits
#30 detachable blades use the A5 standard — they interchange across Andis, Oster, Wahl KM-series, and Heiniger A5-style clippers regardless of which brand made the blade. They do not fit 5-in-1 adjustable clippers (Wahl Bravura/Arco) or screw-on home clippers, which take their own blade systems.
Leaves more coat
#15 3/64"
Cuts closer
#50
All blade sizes
FAQ
- How much hair does a #30 blade leave?
- A #30 blade leaves about 1/50" (0.5 mm) of coat.
- Will a #30 blade fit my clipper?
- #30 detachable blades follow the A5 standard, so they interchange across A5-style clippers from Andis, Oster, Wahl (KM series), and Heiniger. They do not fit 5-in-1 adjustable-blade clippers (like the Wahl Bravura) or screw-on home clippers — those use their own blade systems.
- Is a #30 blade safe to use at home?
- Close-cutting blades heat up fast and can burn skin. Check blade temperature against your forearm every few minutes, use coolant spray, and keep this length away from thin-skinned areas unless you've been shown how. When in doubt, this is a job for a professional groomer.
Sources